- Decide on the location and size of the driveway. Measure the area and mark the boundaries with stakes and string.
- Obtain any necessary permits from the local council.
- Contact your local utility companies to have them mark any underground lines, such as electric cables, drainage pipes, telephone cables, etc.
- Clear the area of any obstacles, such as , rocks, or debris.
- Excavate the area to the desired depth, using a excavator or other excavation equipment. Be careful not to damage any underground lines.
- Install a layer of gravel or crushed rock in the excavated area, leveling it as you go. This will serve as the base layer for the driveway.
- Compact the gravel or crushed rock layer with a plate compactor or a roller.
- Add a layer of landscaping fabric over the compacted layer. This will help prevent weeds from growing through the surface of the driveway.
- Add a layer of coarse sand or fine gravel over the landscaping fabric, leveling it as you go.
- Compact the sand or fine gravel layer with a plate compactor or a roller.
- Install a sheet of mesh over the sand or fine gravel layer. The mesh will provide additional strength to the driveway.
- Mix the concrete according to the manufacturer’s instructions.
- Pour the concrete over the mesh, spreading it out evenly with a rake or shovel.
- Use a screed board to level the concrete to the desired height.
- Smooth the surface of the concrete with a trowel.
- Use a jointer tool to add expansion joints into the surface of the concrete. This will help prevent cracking.
- Allow the concrete to dry and cure for the recommended amount of time, according to the manufacturer’s instructions.
- Install edging materials along the sides of the driveway, such as bricks or landscape timbers, to hold the pavers in place.
- Fill the joints between the pavers with dry sand, sweeping it into the gaps and using a compactor to settle the sand in place.
- Enjoy your new driveway!
block paving by bio landscapes
